Uno sviluppatore leader di radar a onde millimetriche intelligenti!

+86-18028766992 sales@yteqsense.com

Controllo di volo UAV/

Radar per evitare le collisioni UAV URE120 120M

  • Overview
Send Inquiry

URE120 120M UAV Collision Avoidance Radar is developed to detect obstacles to UAV during flying, so the flight control can make action to avoid collision and bring safety to UAV. The radar has advantages of high precision, small size, high sensitive, light weight, easy for integration and stable performance. It will send back the relative distance, speed and angle data between obstacles and radar to make the drone keep away from obstacles and ensure its safe working.

ItemParametersData
 Antenna PerformanceAzimuth±15°
Elevation-5°~+3°
EIRP(dBm)30
Detection PerformanceDistance detection range1.5~120m
Distance detection accuracy±0.1m
Distance detection resolution0.9m
Radar PerformanceFrequency79GHz
Refresh Rate20Hz
Bandwidth0.16GHz
System PropertyWorking Voltage5-24V
Working Temperature-40℃~85℃
Power Consumption3W
Protection RatingIP67
Communication InterfaceUART/CAN
PCB Size55*52*1.6mm

Type: UAV Collision Avoidance Radar Interface: UART/CAN

Protection Level: IP67 Dimensions: 76*71.5*19.6mm

Weight: 87g (Including cables) Adapted Controller: Pixhawk / Ardupilot / Open Source

FAQ

QWhat is the detect range of URE120 120M UAV Collision Avoidance RadarWhy the minimum detect distance is 1.5m?

AThe obstacle detection range is 1.5~120m. Considering about the drone wing length, it needs to stop while the distance between drone and obstacle is less than 1.5m. So the minimum detection distance is 1.5m.

Q: Don’t know how to calculate the best install angle, is there a recommended angle?

A: According to the installation angle recommendation and the test result, we suggest flight controller be inclined 12°upward for installation.

Q: Will the radar have data output if it hasn’t detected any obstacles?

A: Radar outputs data in real time. While radar is not detecting any obstacle or the obstacle distance longer than 120m, it outputs data 0; While detecting obstacle successfully, it outputs the actual distance of obstacle.

Please contact service manager freely if need any help during installation.

Ottieni un preventivo ?